Kibosh Router 2.0 Upgrade Firmware

You are here:
< Back

Kibosh Router 2.0 Upgrade Firmware / Reset to Factory

  1. Log into your Global Dashboard
  2. If you have a lot of settings you don’t want to lose, choose Upgrade Firmware.

3. Upgrade Firmware, Clearing All Device Settings is like doing a factory reset and will wipe all settings.  This is your best option if you’re having issues of any kind, and what I always use.

NOTE: You can update the firmware even if it’s the same version without hurting anything.

NOTE: You can update the firmware many times without hurting anything.

NOTE: If you clear all device settings it’s a factory reset. So if you’re troubleshooting something – please reset the firmware.

Step by Step:

  1. Log into your Global Dashboard
  2. Go to Manage Device > Upgrade Firmware
    • Click Upgrade Firmware if you want to preserve your existing settings.
    • Click Upgrade Firmware, Clearing All Device Settings for a ‘restore to factory’ type update.
  3. Wait five minutes, patience….
    • The krn600 Wi-Fi may disappear and then reappear a few times (so wait five minutes)
  4. Reconnect to your Kibosh Wi-Fi
    • Password for both Wi-Fi is back to default: abcd0001
      •  Both Wi-Fi: krn600 / krn_5g_600
  5. Bring up your Dash
    1. Manage Device > Update Firmware and make sure your “…device is up to date.”
    2. Manage Device > Wi-Fi and change your wireless back to the way it was prior to the firmware update.

NOTE:  Connected Hosts will not show real device names for a few hours post firmware update. You can expedite this by restarting the device(s) which will force them to check in (or wait and they will check in eventually).


Global Dashboard

Global Dashboard Help


Internet Security and Parental Controls.

Tales from the blog!