$0.00

TP Link CR700 Router

You are here:
< Back

 

This article is to assist with setting up Kibosh Shield on a TP-Link CR700 router.

The original manual for this router can be found here: http://www.tp-link.com/res/down/doc/Archer_CR700_V1_UG.pdf

Step 1.

Type http://192.168.1.1 into your preferred web browser. NOTE: You will need to log in to access the router settings. The default login information can be found below.

  • Username: admin
  • Password: admin

Step 2.

Click on the Advanced tab located on the right side of the screen.

?name=skitch TP Link CR700 Router

Step 3.

?name=skitch+%284%29 TP Link CR700 Router

Step 4.

Next, click on IPv6 LAN Settings.

  • Uncheck user defined prefix.
  • Uncheck DHCPv6 server settings.

?name=skitch+%285%29 TP Link CR700 Router

Step 5.

Now that you have configured your router for Kibosh Shield, we highly suggest that you flush your DNS resolver cache and web browser caches to ensure that your new DNS configuration settings take immediate effect. Additionally, if you have a Dynamic IP address please refer to this article which will guide you through how to automatically update your dynamic IP address.

Step 6.

Test your new DNS setting by going to www.info.com and search for abcd1234 – you should receive a Kibosh Success page.

Kibosh

The protector of their tomorrows since 2010.