$0.00

Router Config

How to enable Kibosh on Gargoyle.

  Gargoyle is a polished, intuitive interface for small, widely available routers like Linksys, Asus, Netgear, etc. It provides functionality and customizability – far above and beyond – what the default software provides including sophisticated quality of service, and bandwidth monitoring tools: Unlimited Device Protection. No software. Full Kibosh Pro features (see Feature Matrix). Remote web filter management. Bandwidth Monitoring and Quotas. Manage in-bound, and out-bound firewall ports. Gargoyle is free to use. Starting in version 1.9.2 the Gargoyle firmware…

0
Read More

AT&T U-verse

  Unfortunately, due to the firmware restrictions that AT&T has placed upon Uverse-enabled devices, it is not possible to change the DNS settings on most of these devices. This is a limitation due to ATT and unfortunately cannot be changed. So the whole home protection aspect of the Kibosh solution will not work. However, the router portion will. To utilize another router connected to a UVerse router without experiencing potential service issues, the UVerse router may need additional configuration. We…

0
Read More

D-Link DIR-890L AC3200 Ultra

  1. Open a web-browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and enter http:// dlinkrouter.local./ or the IP address of the router (http://192.168.0.1) 2. Enter your password. If you did not create a password with the Setup Wizard, leave the Admin Password field blank by default. Click Log In to proceed. 3. Under the Settings tab, leave your internet connection as Dynamic IP (DHCP), and enter the Kibosh Cloud DNS servers for your region (listed in the setup guide)…

0
Read More

Buffalo Airstation

  These instructions are for the Buffalo Airstation WZR-1750DHP / WZR-1166DHP, but will probably get the job done on all Airstations. NOTE: Buffalo Airstation User Manual: http://cdn.cloudfiles.mosso.com/c85091/WZR1750Manual_en.pdf 1. Visit the router’s IP address (http://192.168.11.1) in a new browser window. 2. The prompt “Enter username/password” screen will appear. By default, the username is “admin” and the password is “password”. 3. On the Home screen, click on “Advanced Settings”. 4. Click on “Internet” and enter the Kibosh Cloud DNS servers: 5. Click…

0
Read More

Generalized Router Config Guide

  Here are generalized router configuration settings. If you have a specific router type, follow the instructions for that router but substitute our DNS servers for theirs. NOTE: Kibosh DNS servers are listed in the setup guide you get with purchase. Or you can request them here. NOTE: Be sure to ask Google for help by searching for your router’s model, and ‘change DNS’. For example – ‘tp-link wdr3600 change DNS’. This will usually yield good results. How to change…

0
Read More

TP-Link Archer

  Log into the Admin portal. The default address is http://192.168.0.1/. Click on the Internet option Enter Kibosh DNS servers into the Primary DNS and Secondary DNS fields and check “Use These DNS servers”. Save the settings Test the filter: go to www.info.com and search for abcd1234

0
Read More

Huawei Router Configuration (Mobile Hotspot)

  This guide refers to a Huawei EchoLife HG520s router, but will apply to most Huawei routers in general. 1. Visit the router’s IP address in a new browser window. The standard address of the router’s config is 192.168.1.1. (If you have forwarded port 80 to another machine, the location becomes 192.168.1.1:8080.) 2. On the left hand panel, click Basic. 3. Click DHCP on the expanded menu. 4. Enter Kibosh DNS addresses in Primary DNS Server and Secondary DNS Server fields, then click the Submit button. Please write down your current…

0
Read More
Kibosh

Internet Security and Parental Controls.