$0.00

Router Config

NetGear General Web Interface

  Type the router’s setup URL (http://192.168.0.1) into a web browser address bar. http://192.168.0.1 is the default Netgear router IP address. (http://192.168.1.1 will work for some Netgear models.) 2. Enter the password. 3. Type in Kibosh Nameserver addresses in Primary DNS and Secondary DNS fields. If you do not see the following screen, click on Basic Settings. If the options are not present and your device is supplied by your Internet provider, the ability to set custom DNS servers may have been disabled.   Please write…

0
Read More

How to change SSID.

  The default Kibosh WiFi SSID is ‘krn600‘, and the default password to join is ‘abcd0001‘. You can change these settings if you want to. You must be connected to your Kibosh appliance either via WiFi or Ethernet cable. Open your browser to http://192.168.10.1 and login using the password ‘password‘ Go to Connection > Basic Look for the Wireless section (see image below) Change the SSID to whatever you want This is the name of the WiFi network all devices…

0
Read More

Kibosh Router Emergency Recovery Step by Step Windows.

  Detailed instructions for Windows PC. First, you need to set a static IP on the PC you’ll be working from: Click here to download Putty client. Plug one end of an Ethernet cable into the Kibosh router’s LAN port, and the other end into your PC NIC Go to Control Panel > Network and Sharing Center Select Change Adapter Settings Right-click on the Ethernet adapter plugged into the Kibosh Router, and choose Properties This will bring up Ethernet Properties…

0
Read More

Spectrum Router

  Spectrum Router Log into the router usually found at http://192.168.1.1 using the default admin / admin If address does not work – how to find your routers address. Choose Internet settings (see image #1) Manually specify DNS Enter Kibosh Nameserver (see image #2) Apply Image #1  Image #2

0
Read More

How to change your router DNS.

  How to change your routers DNS settings: Get the IP address of your existing router (i.e., the gateway to the Internet), and type this IP into your browsers URL bar to gain access your modem/routers Admin Panel. How to do this: Watch this quick video. Or, manual Instructions: Check underneath your router, sometimes the Admin Panel address is listed there. Second, type each one of these into your browser – if you get a login screen that’s it: 192.168.0.1…

0
Read More

Cisco Linksys DPC3825

  Open the Cisco router’s configuration page The default location is http://192.168.0.1 but may vary. How to find the routers config page. Under Setup, open up LAN Setup In the DNS boxes under “Client Lease Time”, enter the Kibosh Nameserver addresses Enter the Kibosh Nameserver IPs into the first two boxes – leave the third server blank: LAN 1 Static DNS: Kibosh Nameserver LAN 2 Static DNS: Kibosh Nameserver LAN 3 Static DNS: Blank Save Changes. Reboot all devices on…

0
Read More

DIY Parental Control Router Options.

  Although we don’t ship routers to all countries, the Kibosh Filter will work anywhere in the world. All you need to do is provide the hardware. How to build your own Parental Control router.  Buy a router (any router), flash it will Gargoyle or DD-WRT, and use Kibosh Open (free) Simply change your routers DNS settings to Kibosh’s. NOTE: if users trying to bypass the router is a concern, see How to block DNS Bypass. Buy your own router,…

0
Read More

Kibosh Pulse.

  When using your own router with Kibosh 360 you’ll need to install a small agent somewhere on your network. This agent keeps your WAN IP in sync with Kibosh 360 filtering servers so that your Web Filter Setting rules are always applied correctly (whitelist, blacklist, categories, timed filters, logs, etc). If your WAN IP changes these settings will stop working. NOTE: At no time will the actual filtering of pornography (domain blocking, SafeSearch enforcement, term blocking) ever stop. Only…

0
Read More
Kibosh

The protector of their tomorrows since 2010.