$0.00

Technical Support

How to remove Kibosh Filter.

  What to do if you need to remove Kibosh Filter from your Internet. You own a Kibosh Router / 360 / Cloud: Log in at Kibosh Filter, and cancel your subscription. To remove Kibosh replace the router’s KRMU firmware with a standard router O/S. To do this: Log into the Kibosh device at http://192.168.10.1 Default password is ‘password’ Go to System > Update Firmware and update using the appropriate build (click to download): N600 (two antenna) 1043ND (three antenna)…

0
Read More

How to put time limits on apps.

    How to put a time limit on apps / websites: Log into your MyFilter Dashboard Go to Web Filter > Timed Filters Set your Timezone Enter Website to Block Set the repeat Schedule Set your time frame Add Save Filters NOTE: Timed Filters to not work on YouTube – go to Web Filter > Options to enable YouTube SafeMode which is very effective at blocking objectionable content.

0
Read More

Windows 10

  How to protect Windows 10 with Kibosh Internet Security. 1. Right click the Start menu and select Network Connections.   2. On the left-hand side click Ethernet, in Ethernet click Change adapter options. 3. Right click the network connection you’re using and select Properties.   4. Highlight ‘Internet Protocol Version 4 (TCP/IPv4)’ and click Properties.   5. Select Use the following DNS server addresses and type Kibosh Open Nameservers in the Preferred DNS server and Alternate DNS server fields.   6. Click…

0
Read More

NetGear General Web Interface

  Type the router’s setup URL (http://192.168.0.1) into a web browser address bar. http://192.168.0.1 is the default Netgear router IP address. (http://192.168.1.1 will work for some Netgear models.) 2. Enter the password. 3. Type in Kibosh Nameserver addresses in Primary DNS and Secondary DNS fields. If you do not see the following screen, click on Basic Settings. If the options are not present and your device is supplied by your Internet provider, the ability to set custom DNS servers may have been disabled.   Please write…

0
Read More

How to change SSID.

  The default Kibosh WiFi SSID is ‘krn600‘, and the default password to join is ‘abcd0001‘. You can change these settings if you want to. You must be connected to your Kibosh appliance either via WiFi or Ethernet cable. Open your browser to http://192.168.10.1 and login using the password ‘password‘ Go to Connection > Basic Look for the Wireless section (see image below) Change the SSID to whatever you want This is the name of the WiFi network all devices…

0
Read More

Avast

  Avast will interfere with Kibosh filtering if you have turned on all their Core Shields. This is because Avast, in case you didn’t know, if sending all – ALL – of your Internet traffic through their servers, i.e. Avast is essentially a VPN which will tunnel through any filter. With Kibosh protecting your Internet all you need going forward is local antivirus, and the non-subscription kind. Kibosh blocks the bad stuff before you download it, local antivirus works (hopefully)…

0
Read More

Kibosh Router Emergency Recovery Step by Step Windows.

  Detailed instructions for Windows PC. First, you need to set a static IP on the PC you’ll be working from: Click here to download Putty client. Plug one end of an Ethernet cable into the Kibosh router’s LAN port, and the other end into your PC NIC Go to Control Panel > Network and Sharing Center Select Change Adapter Settings Right-click on the Ethernet adapter plugged into the Kibosh Router, and choose Properties This will bring up Ethernet Properties…

0
Read More

Spectrum Router

  Spectrum Router Log into the router usually found at http://192.168.1.1 using the default admin / admin If address does not work – how to find your routers address. Choose Internet settings (see image #1) Manually specify DNS Enter Kibosh Nameserver (see image #2) Apply Image #1  Image #2

0
Read More

Device Naming

  Kibosh Router / Cloud / 360 owners can manage devices on their networks by doing things like scheduling Internet access times. These rules are assigned to a device’s IP, and if that IP changes the rule will stop working. So, for Parental Control rules to work correctly, long term, you will want to assign a static IP / Name to each device you want to manage. Video: How to assign a name & IP to a device for Parental Controls (2.41m).…

0
Read More
Kibosh

The protector of their tomorrows since 2010.